Bullseye Flame out

[Oneshot]

i Had my bullseye set at 225 with pork ribs and I went out to check them after about 2hours and the temp was at around 190 going down, the flame was out. I restarted it and the same thing happened again. Any ideas

 

[mac_hine82]

Make sure your fire pot isn’t full of unburned pellets or ash. Make sure you auger is turning.

 

[Mastertech59]

Possibly bad pellets you can trying turning up the minimum feed rate setting. There is a troubleshooting section in the last part of the manual.

https://5004282.app.netsuite.com/c....merce Standard/manuals/RT-B380ManualFeb23.pdf