I did a wheel mod on my Bull. I added extra length to the back side to add more stability.
Stainless 5/8" rod 27 inches long.
2" X 1" channel, 26 inches long. Drilled holes and mounted casters from Caster city. They have 1/2" holes in the pivot and you use a 1/2 x 1 1/4 inch bolt to mount with lock nuts. They will not flat spot.
10 inch Wheels from Caster City. They will not flat spot. Four locking collars, Six 5/8" washers for spacers. Wheels are greasable as are the casters.
Spoke to a guy named Greg. Very helpful and knowledgable.
https://www.castercity.com/
Here are my part numbers
K3APB5X-ML-HK1/2-LA Swivel Caster with Total Lock Brake, 5" Polyolefin Wheel, 1/2" Hollow Kingpin, Lube Axle
SNOH10x2.75-PS5/8 10" Semi-Pneumatic Wheel, Rubber Tire pressed on a Plastic Center, Offset 2-1/4" Hub Length. 5/8" ID Precision Sealed Ball Bearings.
Stainless 5/8" rod 27 inches long.
2" X 1" channel, 26 inches long. Drilled holes and mounted casters from Caster city. They have 1/2" holes in the pivot and you use a 1/2 x 1 1/4 inch bolt to mount with lock nuts. They will not flat spot.
10 inch Wheels from Caster City. They will not flat spot. Four locking collars, Six 5/8" washers for spacers. Wheels are greasable as are the casters.
Spoke to a guy named Greg. Very helpful and knowledgable.
https://www.castercity.com/
Here are my part numbers
K3APB5X-ML-HK1/2-LA Swivel Caster with Total Lock Brake, 5" Polyolefin Wheel, 1/2" Hollow Kingpin, Lube Axle
SNOH10x2.75-PS5/8 10" Semi-Pneumatic Wheel, Rubber Tire pressed on a Plastic Center, Offset 2-1/4" Hub Length. 5/8" ID Precision Sealed Ball Bearings.
Attachments
Last edited: