smovider
Member
Apparently 6 butts simultaneously, but how many Packers and or how many butts with one packer? I mean is it possible to do 1 packer and 2 butts at the same time? If so, how much more with the RT-1250?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
There’s charts on recteq for each grill telling you how much fits. That’s how I picked my grill, according to the capacity graphics.Apparently 6 butts simultaneously, but how many Packers and or how many butts with one packer? I mean is it possible to do 1 packer and 2 butts at the same time? If so, how much more with the RT-1250?
Probably. The second rack is where most of my food gets cooked. It’s a gentler heat as it’s further from the diffuser/grease tray. 1 packer per shelf, no worries about space.Am I going to regret going with saving money on the 700?
^^^This^^^Probably. The second rack is where most of my food gets cooked. It’s a gentler heat as it’s further from the diffuser/grease tray. 1 packer per shelf, no worries about space.
That would be my thought as well. I have the large recteq interior shelf for my 700, and in nearly four years I have perhaps used it 4 times. Now that I have the Yoder and its top shelf, which operates much like the 1250 top shelf, I use it on about every cook.Just get the 1250 and be done with it all.....
Water panIs there a way do diffuse the heat even more without adversely affecting the PID's accuracy?
So 2 of these 16.5 side by side and the 18 deep will fit in the 700? If it is 1" tall what pans are you using for drip? Is that enough for water as well?This is what I use now. If you get a huge packer it might be too small but a couple of them would work. It’s a nice heavy duty rack. An aluminum drip pan fits underneath.
Make sure 2 of those side-by-side will fit in the 700. The 700 has that pesky interior light that can get in the way of a shelf.So 2 of these 16.5 side by side and the 18 deep will fit in the 700? If it is 1" tall what pans are you using for drip? Is that enough for water as well?
and it looks like the 1250 does not have a light. If it is possible to get enough clearance for a pan and 2 packers on a shelf, the 700 or 1250 would work. and it depends on the size of packer. 1 packer super easy, It would be possible to do 2 packers up to 12-13lbs each, I think. Depending on finished trimmed length.Make sure 2 of those side-by-side will fit in the 700. The 700 has that pesky interior light that can get in the way of a shelf.