Bull Offset Setting

[fullhouse32]

And go. Please teach me the good the bad.
the why to and do not.

 

[Mastertech59]

And go. Please teach me the good the bad.
the why to and do not.

I performed this offset setting adjustment on my Bull and I found my grills temperatures lower than selected, after this adjustment my Bull has been almost perfect and time to cook to done per recipes I was using was a lot better.

 

[Mastertech59]

https://www.google.com/search?q=rec...ent=gws-wiz#kpvalbx=_YXtaYJWxCoG3ggfPpKm4Dg15

 

[fullhouse32]

Thank you now I can try and dial my Bull in.

 

[okie]

My 590 was right on from the beginning. But the Bullseye? not so. Ended up with +17 to even get close. Make sure you have an accurate ambient temp probe. I tested at center and about 1.5 inches off the grates. Also, set the temp you want and let the pit attain and sit on that setting for at least 1/2 hr before testing, as it takes a while to get the grates heated up. (take out the GrillGrates if you have them and they are inside as they get hotter than set temp).