Bullseye Knocking noise

Zackj1993

New member
Messages
2
Grill(s) owned
  1. Bullseye
Getting a knocking noise in my auger and smoke coming back through hopper. Do I have a clog? Pellets seem to catch fire in the auger. After I mess around with it I seem to get it back to normal. I vacuum out ash every few cooks
 
What are the pellets being used ?
Bear mountain. But before I used 40lbs or pit boss pellets and on the last cook I used those is when it started. But nit till the end of that bag. I went through 40lbs with no issues until the last cook. And still had some left over before I changed brands. I took out those before I used the new brand though.
 
Did you dump the remainder of the bag into the hopper without checking for sawdust? You may have had a bunch of sawdust in the bottom of the bag that went into the hopper as well. If the sawdust gets even a little damp, it can set up like concrete. And, IME, it can also smolder back into the tube and create a blockage.

I’d empty the hopper of pellets and get a look at the auger and tube.
 
I would also empty the hopper as recommended by Jim6820. During your analysis, you may find a stone/pebble, cluster of fused pellets, or other debris. If you find any hardware (washer, nut, bolt) save it just in case it belongs to your auger assembly and explore/look for the source.
 
Last edited:
I have a Bullseye and use PitBoss almost exclusively. I do keep my pellets dry in storage and my grill is always covered when not in use and under patio. Never had that problem but I’ve read a few threads where some do.
 
Check the vents at the back of the grill. If they plug, you will get smoke our of the hopper.
 
Mine was making a knocking noise that sounded like the auger but no hopper smoke. My wife cooked on it the next time before I had time to clean it out. It kept knocking through that whole cook but has stopped now. I figured a pellet stuck or something.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Latest posts

Forum statistics

Threads
7,267
Messages
101,899
Members
12,132
Latest member
Gymanji
Back
Top