Sweeptheleg2021
Member
- Messages
- 13
- Grill(s) owned
- RT-680
Assembled new Bullseye today as per instructions. I have around a 2” gap between lid and grill body unless I have the hinge screws really loose. Is this normal?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Is the hinge installed correctly?Assembled new Bullseye today as per instructions. I have around a 2” gap between lid and grill body unless I have the hinge screws really loose. Is this normal?
Yes sir as per instructions.Is the hinge installed correctly?
How should it be seated?Sure looks wrong to me.
You only have two choices.How should it be seated?
Ok. I appreciate the help and insight. I am not new to rec tec, have had a 680 bull since 2014. It was a simple question that in no way required the condensending replies.You only have two choices.
BTW, simple question got a simple reply.Ok. I appreciate the help and insight. I am not new to rec tec, have had a 680 bull since 2014. It was a simple question that in no way required the condensending replies.
Just watched video again and not seeing mistake. I appreciate it. Will call rec teq tomorrow.BTW, simple question got a simple reply.
What does a 680 have to do with a 380? It wasn't condescending, it took me 30 seconds to look at the video, give it a try!
Thank you, will try that today after work.Okay, in looking at the picture you sent, I see that the hinge piece attached to the grill body, is crooked on the right side (closest to us in the picture). Please check that -- loosen the screws (3) in the grill body, and reposition the bottom of the hinge. I think that is it.
Since it is not THAT BIG of a pain, I would go ahead and remove the lid, before you messed with the hinge.Thank you, will try that today after work.
Thank you so much for getting me straight. The hinge was off by a frogs hair, straightened that out even and seated the lid back in, tightened everything up and now there is no binding and lid closes all the way.Since it is not THAT BIG of a pain, I would go ahead and remove the lid, before you messed with the hinge.