I did the initial 400 degree burn on my new grill and a few things were very strange. I was expecting the grill to run hot but not this hot. I placed my Thermoworks Smoke temp prob near the grill prob and it maxed out at over 550+. I figured I would let it run to let things settle down on it own. I checked back in an hour and it was still blazing hot. The grill actual temp was still reading 400. I initially filled the hopper half way and it was empty an hour later. I adjusted the offset and settled on +18. I moved my prob to the center of the grill and it seemed to have settled down. My temp prob was fluctuating between 390-415. I think I can live with that.
When I initially ran the test mode the manual says 1.01 should appear however mine said 1.03 does anyone know what this number represents?
I cant believe this grill runs this hot out of the box. Its obvious they need to make adjustments at the factory. No way should you have to max out the offset right out of the box.
When I initially ran the test mode the manual says 1.01 should appear however mine said 1.03 does anyone know what this number represents?
I cant believe this grill runs this hot out of the box. Its obvious they need to make adjustments at the factory. No way should you have to max out the offset right out of the box.