ghuns
Well-known member
- Messages
- 218
- Grill(s) owned
- Bull
I've had the parts for the folding shelf I was planning for months but after cleaning up the Bull Saturday, I finally decided it was time to knock it out.
Welded up a little frame out of 1/2" angle iron to hold a 1/2x12x36 piece of HDPE mounted to the folding shelf brackets that everybody else is using...
The HDPE is pretty durable stuff. It would probably be OK without the steel frame, but I was a little worried about it sagging in the middle when loaded down.
Welded up a little frame out of 1/2" angle iron to hold a 1/2x12x36 piece of HDPE mounted to the folding shelf brackets that everybody else is using...
The HDPE is pretty durable stuff. It would probably be OK without the steel frame, but I was a little worried about it sagging in the middle when loaded down.