Bull Default auger speed.

[JGW]

Is the default auger speed 60 or 65 on the 700?

 

[C. Keeper]

Is the default auger speed 60 or 65 on the 700?

I think it depends on the controller. 60 or 65 wouldn't make that much difference. It's not the speed but minimum feed.

 

[Greg Jones]

The default minimum feed rate has varied over the years. I believe 65 is probably the most common, mine came at 65. The auger speed is fixed at 2 RPM for the RT-700.

 

[IPlayWithMeat]

Is the default auger speed 60 or 65 on the 700?

On mine, the default is 30, but as mentioned before, it may have changed over the years.

 

[JGW]

Ok, thanks. I was messing around and saw 65, but was thinking 60. Normally I'd grab the manual, but grandkids are here and I'd have to move their bed to get to it.

 

[Greg Jones]

Just checked my electronic version of the manual, as I know how important grandkid time is! Here is what my version says-earlier or later versions may have something different.

 

[JGW]

Thanks

 

[BNeal]

Just checked my electronic version of the manual, as I know how important grandkid time is! Here is what my version says-earlier or later versions may have something different.
View attachment 15018

Good to know, Greg. Thanks for posting that.