Search results

  1. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    It is a aluminum threshold from like Home Depot or Lowe's. I put it in my vise and bent it more to form a curve, then screwed it on using the Bulls' horn/handle screws.
  2. M

    Question for those with Thermoworks Signal

    I use the signal & billows combo on my Pit Barrel Cooker and it works perfectly to monitor, maintain or change temps they the app.
  3. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    RTV - Permatex High-Temp Red RTV Silicone Gasket, 3 oz https://www.amazon.com/dp/B0002UEN1A/ref=cm_sw_r_apan_glt_fabc_TYXE07RBGWJ1QKBGEXD3
  4. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    They should work but maybe peel off down the road, idk. I glued mine on with super glue lol
  5. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    I'm not an engineer, but part of the reason the smoke flows out of the smokestack is that hot air rises and the stack is higher than the chamber so when the fan turns on there is a natural draft that occurs. Not sure you'd get the same effect or flow with that vent.
  6. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    Oak board from Home Depot, stained with redwood and 7-8 coats of polyurethane
  7. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    Correct
  8. M

    Bull BFG auger motor in the RT-700. It's awesome!

    I found and tried to install the 1.6.6 app version after deleting the 1.7.1 version. It installed but wouldn't let me sign in until I updated. This is the wrong moral compass to hang your hat on Recteq!
  9. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    Thanks. Uses the same shelf brackets as the new 2500....another thing they copied from us lol
  10. M

    New recteq app is out

    YW, although I don't see any differences in the app between 1.7 vs 1.7.1
  11. M

    New recteq app is out

    Thanks for the confirmation. App v2.0 must be iOS I guess
  12. M

    New recteq app is out

    My Android app shows as v I have Android app version 1.7.1, is there a different version?
  13. M

    New recteq app is out

    I'm on 1.7.0 Android, but when I used the 700 tonight for the first time since updating this morning, I can't set the MFR below 3.0/30 in the app but I can change it manually on the controller. Anybody else seeing this?
  14. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    The Wi-Fi mod is just a 6db gain antenna mounted on the bottom plate of the controller box, out of the way as it's 5-6" long. Connects within 1-3 seconds; the OEM one took 30-60 secs. Word of caution tho, the connector comes off the circuit board easy but it's a bitch to get back on as it's...
  15. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    The Camp Chef griddle has 4 holes on the left side that bolt to the grill. I used a paper template with the bolt holes punched out and taped to position the setup even with the bottom of the grill. Put the lower braces on as they add support under weight/load. The shelf is just a 36x16 pine...
  16. M

    Bull BFG auger motor in the RT-700. It's awesome!

    Try doing MFR of 15 at 180-200 and 20 at 225 or higher
  17. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    Yes. I offset the gasket about 1/4' from the edge. Works well
  18. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    I use the griddle not the sear station with the lid
  19. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    Thx! 👍
  20. M

    Bull Multiple Mods for new RT-700 plus the BFG 2500 Auger mod (not shown)

    That's a full on bad-ass idea! Just got to explain house mods and why they are needed to the wife 🤣🤣🤣
Back
Top