flh69
Active member
- Messages
- 36
Needed Material
2-- tires from HF
2-- pieces of 5/8 round bar a little longer than the hub you are going to use. Drill a 5/16 hole thru.
2-- M6-1.0 x 2 inch long bolts
Washers
2-- 5/16 bolts 3 inches long
2-- 1/4-28 threaded bolts
Several 5/16 inch flat washers
2--- 5/16 lock nuts
2-- pieces of square tubing about 4” long with a 1-¼ inch inside dia. (1/8 wall)
Drilled & tapped a ¼-28 hole thru one side
Drilled a 5/16 hole thru
Used the removed wheels & installed them on the other end of grill
2-- tires from HF
2-- pieces of 5/8 round bar a little longer than the hub you are going to use. Drill a 5/16 hole thru.
2-- M6-1.0 x 2 inch long bolts
Washers
2-- 5/16 bolts 3 inches long
2-- 1/4-28 threaded bolts
Several 5/16 inch flat washers
2--- 5/16 lock nuts
2-- pieces of square tubing about 4” long with a 1-¼ inch inside dia. (1/8 wall)
Drilled & tapped a ¼-28 hole thru one side
Drilled a 5/16 hole thru
Used the removed wheels & installed them on the other end of grill